Skip to main content

This document describes the Move specification language (MSL), a subset of the Move language that supports specification of the behavior of Move programs. MSL works together with the Move Prover, a tool that can statically verify the correctness of MSL specifications against Move programs. In contrast to traditional testing, verification of MSL is exhaustive and holds for all possible inputs and global states of a Move module or Move script. At the same time, this verification of MSL is fast and automated enough that it can be used at a similar place in the developer workflow where tests are typically conducted (for example, for qualification of pull requests in continuous integration).

While the Move programming language at this point is stable, the subset represented by MSL should be considered evolving. This has no impact on platform stability, since MSL is not running in production; yet MSL is used for offline quality assurance where it is continuously improved for evolving objectives.

This document describes the language only; see Use the Move Prover for instructions. The reader is expected to have basic knowledge of the Move language, as well as basic principles of pre- and post-condition specifications. (See for example the Design by contract). For examples of specifications, we refer to the Aptos framework documentation, which has specifications embedded.

Expressions

Expressions in MSL are a subset of Move program expressions plus a set of additional constructs, as discussed in the following sections.

Type System​

The type system of MSL is similar to that of Move, with the following differences:

  • There are two types of encodings for integer types: num and bv (bit vector). If an integer (either a constant or a variable) is not involved in any bitwise operations directly or indirectly, regardless of its type in Move (u8, u16, u32, u64, u128 and u256), it is treated as the same type. In specifications, this type is called num, which is an arbitrary precision signed integer type. When MSL refers to a Move name that represents an u8 or such, it will be automatically widened to num. This allows writing MSL expressions like x + 1 <= MAX_U128 or x - y >= 0 without needing to worry about overflow or underflow. Different from num, bv cannot and does not need to be explicitly used in specifications: if an integer is involved in bitwise operations such as &, | or ^, it will be automatically encoded as bvat the backend. Moreover, a bv integer has a fixed precision, which is consistent with its precision in Move (bv8, bv16, bv32, bv64, bv128 and bv256). Note that, in general using bv is not so efficient as num in the SMT solver such as Z3. Consequently, the Move Prover has some restrictions when using bitwise operations, which are stated in detail below.
  • The Move types &T, &mut T, and T are considered equivalent for MSL. Equality is interpreted as value equality. There is no need to worry about dereferencing a reference from the Move program: these are automatically dereferenced as needed. This simplification is possible because MSL cannot modify values from a Move program, and the program cannot directly reason about reference equality (which eliminates the need for doing so in MSL). (Note there is also a restriction in expressiveness coming with this, namely for functions which return &mut T. However, this is rarely hit in practice, and there are workarounds.)
  • There is the additional type type, which is the type of all types. It can be used only in quantifiers.
  • There is the additional type range, which represents an integer range (and the notation n..m to denote a value).

Naming​

Name resolution in MSL works similar to the Move language. use declarations can introduce aliases for imported names. MSL functions and variable names must start with a lowercase letter. Schema names are treated like types and must start with a capital letter. (Schemas are a named construct discussed later).

Move functions, MSL functions, Move types, and schemas all share the same namespace and are therefore unambiguous if aliased via a Move use clause. Because of the common name space, an MSL function cannot have the same name as a Move function. This is often handled via the convention to prefix MSL functions as in spec_has_access when the related Move function is called has_access.

Operators​

All Move operators are supported in MSL, except &, &mut, and * (dereference).

In addition to the existing operators, vector subscript v[i], slicing v[i..j], and range construction i..j are supported (the type of integer ranges is a new builtin type called range). Moreover, boolean implication p ==> q is supported as a more intuitive form than !p || q.

Function calls​

In MSL expressions, functions can be called like in Move. However, the callee must either be an MSL helper function or a pure Move function.

Move functions are considered pure if they do not modify global state and do not use Move expression features that are not supported in MSL expressions (as defined in this document).

There is one extension. If a Move function definition contains a direct assert, this will be ignored when it is called from an MSL expression, and the function will be considered pure. For example:

fun get(addr: address): &T { assert(exists<T>(addr), ERROR_CODE); borrow_global<T>(addr) }

This function is pure and can be called from an MSL expression. The assertion will be ignored, and the function will be interpreted as:

spec fun get(addr: address): T { global<T>(addr) }

This is justified by that MSL having partial semantics.

Statements​

Limited sequencing of the form { let x = foo(); x + x } is supported, as well as if-then-else. Other statement forms of the Move language are not supported.

Pack and unpack​

Pack expressions are supported. Unpack expressions are currently not supported.

Quantifiers​

Universal and existential quantification is supported. The general form is:

forall <binding>, ..., <binding> [ where <exp> ] : <exp>
exists <binding>, ..., <binding> [ where <exp> ] : <exp>
  • Bindings can either be of the form name: <type> or name in <exp>. For the second form, the expression must either be a range or a vector.
  • The optional constraint where <exp> allows to restrict the quantified range. forall x: T where p: q is equivalent to forall x: T : p ==> q and exists x: T where p: q is equivalent to exists x: T : p && q.

Notice that it is possible to quantify over types. For example:

forall t: type, addr: address where exists<R<t>>(addr): exists<T<t>>(addr)

Choice operator​

The choice operator allows selecting a value that satisfies a predicate:

choose a: address where exists<R>(a) && global<R>(a).value > 0

If the predicate is not satisfiable, the result of the choice will be undetermined. (See partial semantics).

The choice also comes in a form to select the minimal value from a set of integers, as in:

choose min i: num where in_range(v, i) && v[i] == 2

Cast operator​

In the specification language, we can use the same syntax (e as T) to cast an expression e with one integer type to T, an integer type of another size.

Shift operator​

Shift operators << and >> are supported in the specification language, and both of them have the same semantics with the Move language. As for abort, if a value v has width n, then v << m or v >> m will abort if m >= n.

Bitwise operators​

Move programs using bitwise operators &, | and ^ can be verified in the prover, and these operators are also supported in the specification language. Due to encoding and efficiency issues, using bitwise operators has more caveats:

  • Integers involved in bitwise operations are encoded as bv types at the backend, and two encodings of integers are not compatible. For instance, if a variable v is involved in a bitwise operation such as v & 2 or v = a ^ b, then when it is used in an arithmetic operation v * w or a shift operation v << w, w will be implicitly cast to a bv type in the Move program. However, the specification language does not support implicit type cast so users must explicitly use the built-in function int2bv in the specification: v << int2bv(w). Not that since each bv type has a fixed length (from 8 to 256), values with type num cannot be converted into bv.

  • Verification of bv types is not efficient and may lead to timeout. As a result, users may prefer isolating bitwise operations from other operations and not using int2bv if possible. Moreover, users need to use pragmas to explicitly specify which integer-typed function arguments or struct fields will be used in bitwise computations:

    struct C has drop {
a: u64,
b: u64
}
spec C {
// b, the second field of C, will be of bv type
pragma bv=b"1";
}
public fun foo_generic<T>(i: T): T {
i
}

spec foo_generic {
// The first parameter will be of bv type if T is instantiated as a number type
pragma bv=b"0";
// The first return value will be of bv type if T is instantiated as a number type
pragma bv_ret=b"0";
}

public fun test(i: C): u64 {
let x1 = foo_generic(C.b);
x1 ^ x1
}

spec test {
// Explicit type cast is mandatory for generating correct boogie program
ensures result == (0 as u64);
}

Note that if arguments or fields of a generic function or struct are specified with bv types, they will be of bv types in all instances of the function or the struct when the instantiated type is an integer type.

  • Values with integer types in vectors and tables can be encoded as bv types; indices and keys in tables cannot be bv types for now. Using other types will lead to internal errors.

Built-in functions​

MSL supports a number of built-in constants and functions. Most of them are not available in the Move language:

  • MAX_U8: num, MAX_U64: num, MAX_U128: num returns the maximum value of the corresponding type.
  • exists<T>(address): bool returns true if the resource T exists at address.
  • global<T>(address): T returns the resource value at address.
  • len<T>(vector<T>): num returns the length of the vector.
  • update<T>(vector<T>, num, T>): vector<T> returns a new vector with the element replaced at the given index.
  • vec<T>(): vector<T> returns an empty vector.
  • vec<T>(x): vector<T> returns a singleton vector.
  • concat<T>(vector<T>, vector<T>): vector<T> returns the concatenation of the parameters.
  • contains<T>(vector<T>, T): bool returns true if element is in vector.
  • index_of<T>(vector<T>, T): num returns the index of the element in the vector, or the length of the vector if it does not contain it.
  • range<T>(vector<T>): range returns the index range of the vector.
  • in_range<T>(vector<T>, num): bool returns true if the number is in the index range of the vector.
  • in_range<T>(range, num): bool returns true if the number is in the range.
  • update_field(S, F, T): S updates a field in a struct, preserving the values of other fields, where S is some struct, F the name of a field in S, and T a value for this field.
  • old(T): T delivers the value of the passed argument at point of entry into a Move function. This is allowed in ensures post-conditions, inline spec blocks (with additional restrictions), and certain forms of invariants, as discussed later.
  • TRACE(T): T is semantically the identity function and causes visualization of the argument's value in error messages created by the prover.
  • int2bv(v) explicitly converts an integer v into its bv representation.
  • bv2int(b) explicitly converts a 'bv' integer 'b' into the num representation. However, it is not encouraged to use it due to efficiency issue.

Built-in functions live in an unnamed outer scope of a module. If the module defines a function len, then this definition will shadow that of the according built-in function. To access the built-in function in such a situation, one can use the notation ::len(v).

Partial semantics​

In MSL, expressions have partial semantics. This is in contrast to Move program expressions, which have total semantics, since they either deliver a value or abort.

An expression e[X] that depends on some variables X may have a known interpretation for some assignments to variables in X but is unknown for others. An unknown interpretation for a sub-expression causes no issue if its value is not needed for the overall expression result. Therefore, it does not matter if we say y != 0 && x / y > 0 or x / y > 0 && y != 0: boolean operators are commutative.

This basic principle inherits to higher-level language constructs. For example, in specifications, it does not matter in which order conditions are supplied: aborts_if y != 0; ensures result == x / y; is the same as ensures result == x / y; aborts_if y != 0;. Also, aborts_if P; aborts_if Q; is the same as aborts_if Q || P .

Moreover, the principle of partial semantics is inherited to specification helper functions, which behave transparently. Specifically, inlining those functions is equivalent to calling them (call-by-expression parameter passing semantics).

Specifications

Specifications are contained in so-called specification blocks (abbreviated spec block) that can appear as module members and inside Move functions. The various types of spec blocks are shown below, and will be discussed in subsequent sections.

module addr::M {
struct Counter has key {
value: u8,
}

public fun increment(a: address) acquires Counter {
let r = borrow_global_mut<Counter>(a);
spec {
// spec block targeting this code position
...
};
r.value = r.value + 1;
}

spec increment {
// spec block targeting function increment
...
}

spec Counter {
// spec block targeting struct Counter
...
}

spec schema Schema {
// spec block declaring a schema
...
}

spec fun f(x: num): num {
// spec block declaring a helper function
...
}

spec module {
// spec block targeting the whole module
...
}
}

Apart from spec blocks inside Move functions, the textual position of spec block is irrelevant. Also, a spec block for a struct, function, or module can be repeated multiple times, accumulating the content.

Separating specifications​

Instead of putting specifications into the same module as the regular Move definitions, one can also put them into a separate "specification" module, which can live in the same or a different file:

module addr::M {
...
}
spec addr::M {
spec increment { .. }
}

The syntax of a specification module is the same as for a regular module; however, Move functions and structures are not allowed.

A specification module must be compiled together with the Move module it is targeting and cannot be compiled and verified standalone.

In case Move definitions are far apart (e.g. in different files), it is possible to augment the specification of a Move function with a signature of this function to give sufficient context to understand the specification. This syntax is optionally enabled in regular and in specification modules:

public fun increment(a: address) acquires Counter { .. }
...
spec increment(a: address) { .. }

Pragmas and properties​

Pragmas and properties are a generic mechanism to influence interpretation of specifications. They are also an extension point to experiment with new concepts before they become part of the mainstream syntax. Here we give a brief introduction into their general syntax; individual instances are discussed later.

The general form of a pragma is:

spec .. {
pragma <name> = <literal>;
}

The general form of a property is:

spec .. {
<directive> [<name> = <literal>] <content>; // ensures, aborts_if, include, etc..
}

The <literal> can be any value supported by MSL (or the Move language). A value assignment can also be omitted, in which case a default is used. For example, it is common to use pragma option; as a shortcut for pragma option = true;.

Instead of a single pragma or property, a list can also be provided, as in invariant [global, isolated] P.

Pragma inheritance​

A pragma in a module spec block sets a value that applies to all other spec blocks in the module. A pragma in a function or struct spec block can override this value for the function or struct. Furthermore, the default value of some pragmas can be defined via the prover configuration.

As an example, we look at the verify pragma. This pragma is used to turn verification on or off.

spec module {
pragma verify = false; // By default, do not verify specs in this module ...
}

spec increment {
pragma verify = true; // ... but do verify this function.
...
}

General pragmas and properties​

A number of pragmas control general behavior of verification. Those are listed in the table below.

NameDescription
verifyTurns on or off verification.
intrinsicMarks a function to skip the Move implementation and use a prover native implementation. This makes a function behave like a native function even if it not so in Move.
timeoutSets a timeout (in seconds) for function or module. Overrides the timeout provided by command line flags.
verify_duration_estimateSets an estimate (in seconds) for how long the verification of function takes. If the configured timeout is less than this value, verification will be skipped.
seedSets a random seed for function or module. Overrides the seed provided by command line flags.

The following properties control general behavior of verification:

NameDescription
[deactivated]Excludes the associated condition from verification.

Pre and post state​

Multiple conditions in spec blocks work with a pre and post state, relating them to each other. Function specifications are one example of this: in the ensures P condition, the pre-state (at function entry) and the post-state (at function exit) are related via the predicate P. However, the concept is more general and also applied for invariants, where the pre-state is before and post-state after a global update.

In contexts where a pre/post-state is active, expressions are evaluated implicitly in the post-state. To evaluate an expression in a pre-state, one uses the built-in function old(exp), which evaluates its parameter in the pre-state and returns its value. It is important to understand that every sub-expression in exp is computed in the pre-state as well, including calls to helper functions.

The 'state' in question here consists of assignments to global resource memory, as well as to any parameters of the function of type &mut T. Examples:

fun increment(counter: &mut u64) { *counter = *counter + 1 }
spec increment {
ensures counter == old(counter) + 1;
}

fun increment_R(addr: address) {
let r = borrow_global_mut<R>(addr);
r.value = r.value + 1;
}
spec increment_R {
ensures global<R>(addr).value == old(global<R>(addr).value) + 1;
}

Helper functions​

MSL allows defining helper functions. Those functions can then be used in expressions.

Helper functions are defined using the following syntax:

spec fun exists_balance<Currency>(a: address): bool { exists<Balance<Currency>>(a) }

As seen in the example, helper functions can be generic. Moreover, they can access global state.

Definitions of helper functions are neutral regarding whether they apply to a pre- or post-state. They are evaluated in the currently active state. For instance, in order to see whether a balance existed in the pre-state, one uses old(exists_balance<Currency>(a)). Consequently, the expression old(..) is not allowed within the definition of a helper function.

Helper functions are partial functions; see the discussion of partial semantics.

Uninterpreted functions​

A helper function can be defined as uninterpreted by simply omitting its body:

spec fun something(x: num): num;

An uninterpreted function is one of the prover is allowed to assign some arbitrary meaning to, as long as it is consistent within a given verification context. Uninterpreted functions are a useful tool for abstraction in specifications (see also abstract specifications).

Axioms​

The meaning of helper functions can be further constrained by using axioms. Currently, axioms must be contained in module spec blocks:

spec module {
axiom forall x: num: something(x) == x + 1;
}

Axioms should be used with care as they can introduce unsoundness in the specification logic via contradicting assumptions. The Move Prover supports a smoke test for detecting unsoundness via the --check-inconsistency flag.

Let bindings​

A spec block can contain let bindings that introduce names for expressions:

fun get_R(account: signer): R { ... }
spec get_R {
let addr = signer::spec_address_of(account);
aborts_if addr != ROOT;
ensures result == global<R>(addr);
}

In a spec block that has a pre-state and post-state (like a function specification), the let name = e form will evaluate e in the pre-state. In order to evaluate an expression in the post-state, use let post name = e. In the rhs expression of this form, one can use old(..) to refer to the pre-state.

Aborts_if condition​

The aborts_if condition is a spec block member that can appear only in a function context. It specifies conditions under which the function aborts.

In the following example, we specify that the function increment aborts if the Counter resource does not exist at address a (recall that a is the name of the parameter of increment).

spec increment {
aborts_if !exists<Counter>(a);
}

If a function has more than one aborts_if condition, those conditions are or-ed with each other. The evaluation of the combined aborts condition (or-ed from each individual condition) depends on the value of the pragma aborts_if_is_partial. If this value is false (the default), the function aborts if and only if the combined aborts condition is true. In this case, the above aborts specification for increment will lead to a verification error, since there are additional situations where increment can abort, namely if incrementing Counter.value would lead to an overflow. To fix this, the specification can be completed like this:

spec increment {
pragma aborts_if_is_partial = false; // This is the default, but added here for illustration.
aborts_if !exists<Counter>(a);
aborts_if global<Counter>(a).value == 255;
}

If the value of aborts_if_is_partial is true, the combined aborts condition (the or-ed individual conditions) only implies that the function aborts. Formally, if A is the combined aborts condition, then with aborts_if_is_partial = true, we have A ==> function_aborts; otherwise we have A <==> function_aborts. Therefore, the following does verify:

spec increment {
pragma aborts_if_is_partial = true;
aborts_if !exists<Counter>(a);
}

Note that there is a certain risk in setting aborts_if_is_partial to true, and best practice is to avoid it in specifications of public functions and Move scripts once those are considered finalized. This is because changing the code after finalization of the spec can add new (non-trivial, undesired) abort situations the original specification did not anticipate yet will nevertheless silently pass verification.

If no aborts condition is specified for a function, abort behavior is unspecified. The function may or may not abort, and verification will not raise any errors, whether aborts_if_is_partial is set or not. In order to state that a function never aborts, use aborts_if false. One can use the pragma aborts_if_is_strict to change this behavior; this is equivalent to an aborts_if false being added to each function that does not have an explicit aborts_if clause.

Aborts_if condition with code​

The aborts_if condition can be augmented with code:

fun get_value(addr: address): u64 {
aborts(exists<Counter>(addr), 3);
borrow_global<Counter>(addr).value
}
spec get_value {
aborts_if !exists<Counter>(addr) with 3;
}

It is a verification error if the above function does not abort with code 3 under the given condition.

In order to specify a direct VM abort, one can use the special constant EXECUTION_FAILURE:

fun get(addr: address): &Counter acquires Counter {
borrow_global<Counter>(addr)
}
spec get {
aborts_if !exists<Counter>(addr) with EXECUTION_FAILURE;
}

This same constant can be used for all other VM failures (division by zero, overflow, etc.).

Aborts_with condition​

The aborts_with condition allows specifying with which codes a function can abort, independent under which condition. It is similar to a 'throws' clause in languages like Java.

fun get_one_off(addr: address): u64 {
aborts(exists<Counter>(addr), 3);
borrow_global<Counter>(addr).value - 1
}
spec get_one_off {
aborts_with 3, EXECUTION_FAILURE;
}

If the function aborts with any other or none of the specified codes, a verification error will be produced.

The aborts_with condition can be combined with aborts_if conditions. In this case, the aborts_with specifies any other codes with which the function may abort, in addition to the ones given in the aborts_if:

spec get_one_off {
aborts_if !exists<Counter>(addr) with 3;
aborts_with EXECUTION_FAILURE;
}

If this is not wanted, and the aborts_with should be independent of aborts_if, one can use the property [check]:

spec get_one_off {
aborts_if !exists<Counter>(addr) with 3;
aborts_if global<Counter>(addr) == 0 with EXECUTION_FAILURE;

aborts_with [check] 3, EXECUTION_FAILURE;
}

Requires condition​

The requires condition is a spec block member that postulates a pre-condition for a function. The Move Prover will produce verification errors for functions that are called with violating pre-conditions.

A requires is different from an aborts_if: in the latter case, the function can be called, and any aborts it produces will be propagated to the caller context. In the requires case, the Move Prover will not allow the function to be called in the first place. Nevertheless, the function can still be called at runtime if verification is skipped. Because of this, requires are rare in Move specifications, and aborts_if are more common. Specifically, requires should be avoided for public APIs.

An example of requires is:

spec increment {
requires global<Counter>(a).value < 255;
}

Ensures condition​

The ensures condition postulates a post-condition for a function that must be satisfied when the function terminates successfully (i.e. does not abort). The Move Prover will verify each ensures to this end.

An example for the ensures condition is the following:

spec increment {
ensures global<Counter>(a) == old(global<Counter>(a)) + 1;
}

Within the expression for the ensures condition, one can use the old function, as discussed in Pre and post state.

Modifies condition​

The modifies condition is used to provide permissions to a function to modify global storage. The annotation itself comprises a list of global access expressions. It is specifically used together with opaque function specifications.

struct S has key {
x: u64
}

fun mutate_at(addr: address) acquires S {
let s = borrow_global_mut<S>(addr);
s.x = 2;
}
spec mutate_at {
pragma opaque;
modifies global<S>(addr);
}

In general, a global access expression has the form global<type_expr>(address_expr). The address-valued expression is evaluated in the pre-state of the annotated function.

fun read_at(addr: address): u64 acquires S {
let s = borrow_global<S>(addr);
s.x
}

fun mutate_S_test(addr1: address, addr2: address): bool acquires T {
assert(addr1 != addr2, 43);
let x = read_at(addr2);
mutate_at(addr1); // Note we are mutating a different address than the one read before and after
x == read_at(addr2)
}
spec mutate_S_test {
aborts_if addr1 == addr2;
ensures result == true;
}

In the function mutate_S_test, the assertion in the spec block is expected to hold. A benefit of the modifies specification on mutate_at is that this assertion can be proved whether mutate_at is inlined.

If the modifies annotation is omitted on a function, then that function is deemed to have all possible permissions for those resources it may modify during its execution. The set of all resources that may be modified by a function is obtained via an interprocedural analysis of the code. In the example above, mutate_S_test does not have a modifies specification and modifies resource S via the call to mutate_at. Therefore, it is considered to have modified S at any possible address. Instead, if the programmer adds modifies global<S>(addr1) to the specification of mutate_S_test, then the call to mutate_at is checked to make sure that modify permissions granted to mutate_S_test cover the permissions it grants to mutate_at.

Invariant condition​

The invariant condition can be applied on structs and on global level.

Function invariants​

The invariant condition on a function is simply a shortcut for a requires and ensures with the same predicate.

Thus, the following spec block:

spec increment {
invariant global<Counter>(a).value < 128;
}

... is equivalent to:

spec increment {
requires global<Counter>(a).value < 128;
ensures global<Counter>(a).value < 128;
}

Struct invariants​

When the invariant condition is applied to a struct, it expresses a well-formedness property of the struct data. Any instance of this struct that is currently not mutated will satisfy this property (with exceptions as outlined below).

For example, we can postulate an invariant on our counter that it never must exceed the value of 127:

spec Counter {
invariant value < 128;
}

A struct invariant is checked by the Move Prover whenever the struct value is constructed (packed). While the struct is mutated (e.g. via a &mut Counter) the invariant does not hold (but see exception below). In general, we consider mutation as an implicit unpack, and end of mutation as a pack.

The Move language semantics unambiguously identifies the point when mutation ends and starts. This follows from the borrow semantics of Move and includes mutation via an enclosing struct. (The mutation of an inner struct ends when the mutation of the root struct where mutation started ends.)

There is one exception to this rule. When a mutable reference to a struct declared in module M is passed into a public function of M which does by itself not return any other mutable reference (which could be borrowed from the input parameter), we treat this parameter as "packed". That means, on function entry, we will unpack it and on function exit we will pack again, enforcing the invariant. This reflects that in Move, struct data can be mutated only within the module that declares the struct; so for an outside caller of the public function, the mutable reference can actually not be mutated unless by calling public functions of module M again. It is a significant simplification of the verification problem to exploit this in the semantics.

Global invariants​

A global invariant appears as a member of module. It can express a condition over the global state of the Move program, as represented by resources stored in memory. For example, the below invariant states that a Counter resource stored at any given address can never be zero:

module addr::M {
invariant forall a: addr where exists<Counter>(a): global<Counter>(a).value > 0;
}

A global invariant is assumed to hold when data is read from the global state, and is asserted (and may fail to verify) at the moment the state is updated. For example, the below function will never abort with arithmetic underflow because the counter value is always greater than zero; however, it will create a verification error since the counter can drop to zero:

fun decrement_ad(addr: address) acquires Counter {
let counter = borrow_global_mut<Counter>(addr);
let new_value = counter.value - 1; // Will not abort because counter.value > 0
*counter.value = new_value; // Fails verification since value can drop to zero
}

Disabling invariants​

There are times when a global invariant holds almost everywhere, except for a brief interval inside a function. In current Move code, this often occurs when something (e.g. an account) is being set up and several structs are published together. Almost everywhere, an invariant holds that all the structs are published or none of them are. But the code that publishes the structs must do so sequentially. While the structs are being published, there will be a point where some are published and others are not.

In order to verify invariants that hold except during small regions, there is a feature to allow users to disable invariants temporarily. Consider the following code fragment:

fn setup() {
publish1();
publish2();
}
}

where publish1 and publish2 publish two different structs, T1 and T2 at address a.

module addr::M {
invariant [global] exists<T1>(a) == exists<T2>(a)
}

As written, the Move Prover will report that the invariant is violated after the call to publish1 and before the call to publish2. If either of publish1 or publish2 is without the other, the Move Prover will also report a violation of the invariant.

By default, a global invariant is checked immediately after the instruction I that touches the resources mentioned in the global invariant. The [suspendable] attribute (at the invariant side) together with two pragmas (specified in function spec block) provide fine-grained control on where we hope this invariant to be checked:

  • disable_invariants_in_body: the invariant will be checked at the end of the function where I resides.
  • delegate_invariants_to_caller: the invariant will be checked by all callers of the function where I resides.

For the example above, we can add the pragma disable_invariants_in_body:

spec setup {
pragma disable_invariants_in_body;
}

which says that invariants are not required to hold while setup is executing but are assumed to hold on entry to and exit from setup.

This pragma changes the Move Prover's behavior. The invariants are assumed on entry to setup but not proved during or after publish1 and publish2. Instead, all invariants that could be invalidated in the body of setup are asserted and proved at the point of return from setup. A consequence of this processing is that the user may need to provide stronger post-conditions on publish1 and publish2 to make it possible to prove the invariants on exit from setup.

Another consequence of this processing is that invariants cannot safely be assumed to hold during the execution of publish1 and publish2 (unless nothing in the body of setup changes state mentioned in the invariant). Therefore, if proving a post-condition requires the invariant to be assumed, the post-condition will fail.

In the example, invariants hold at the call sites of setup but not in the body. For publish1, invariants don't necessarily hold at the call site or in the body of the function. In the example, that behavior is implied because publish1 is called in a context where invariants are disabled.

When invariants are disabled in setup in the above example, the Move Prover cannot assume them on entry to publish1 and publish2 and should not try to prove them on exit from those functions. The Move Prover would have the same behavior for any functions called by publish1 or publish2. The Move Prover automatically adopts this behavior when invariants are disabled in a calling function, but it is possible for the user to declare that a function be treated like publish1.

For example, if publish2 is only called from the setup function above, and we did not disable invariants in setup, we could achieve a similar effect by using the pragma delegate_invariants_to_caller, instead.

spec setup {
pragma delegate_invariants_to_caller;
}

This would be legal only if setup is a private or public (friend) function. The difference between this and disabling invariants in setup is that the invariants would not be assumed at the beginning of setup and would be proved after setup returns at each site where it is called.

While both pragmas disable invariants in the body of a function, the difference is that disable_invariants_in_body assumes invariants on entry and proves them on exit, while delegate_invariants_to_caller does neither.

There are some limitations on how these pragmas can be used. disable_invariants_in_body cannot be declared for functions where invariants are delegated to a caller, either explicitly via the pragma or implicitly because the function is called in a context where invariants have been disabled. (This restriction is to ensure consistent processing, because on pragma assumes that invariants hold in the calling context and the other does not). Second, it is illegal for a public or script function to delegate invariant checking to its callers (since the Move Prover does not know all the call sites), unless the function cannot possibly invalidate an invariant because it doesn't change any of the state mentioned in exists and global expressions appearing in the invariant.

Update invariants​

The update form of a global invariant allows to express a relation between pre-state and post-state of a global state update. For example, the following invariant states that the counter must decrease monotonically whenever it is updated:

module addr::M {
invariant update [global] forall a: addr where old(exists<Counter>(a)) && exists<Counter>(addr):
global<Counter>(a).value <= old(global<Counter>(a));
}

Isolated global invariants​

A global invariant can be marked as [isolated] to indicate that it is not relevant for proving other properties of the program. An isolated global invariant will not be assumed when the related global state is read. It will only be assumed before the state is updated to help prove that the invariant still holds after the update. This feature is for improving performance in situations where there are many global invariants, but they have no direct influence on verification.

Modular verification and global invariants​

Certain usage of global invariants leads to verification problems that cannot be checked in a modular fashion. "Modular" here means that a module can be verified standalone and proven to be universally correct in all usage contexts (if preconditions are met).

A non-modular verification problem may arise if a global invariant refers to state from multiple modules. Consider a situation where module M1 uses module M2, and M1 contains the following invariant, with the helper function condition referring to global state of each respective module:

module addr::M1 {
invariant M1::condition() ==> M2::condition();
}

When we verify M1 standalone, the Move Prover will determine that it also needs to verify functions in M2, namely those which update the M2 memory such that the invariant in M1 can fail.

Assume and assert conditions in code​

A spec block might also occur anywhere an ordinary Move statement block can occur. Here is an example:

fun simple1(x: u64, y: u64) {
let z;
y = x;
z = x + y;
spec {
assert x == y;
assert z == 2*x;
}
}

In such inline spec blocks, only a subset of conditions are permitted:

  • assume and assert statements are allowed in any code locations.
  • loop invariant statements are allowed only in code locations that represent loop headers.

An assert statement inside a spec block indicates a condition that must hold when control reaches that block. If the condition does not hold, an error is reported by the Move Prover. An assume statement, on the other hand, blocks executions violating the condition in the statement. The function simple2 shown below is verified by the Move Prover. However, if the first spec block containing the assume statement is removed, Move Prover will show a violation to the assert statement in the second spec block.

fun simple2(x: u64, y: u64) {
let z: u64;
spec {
assume x > y;
};
z = x + y;
spec {
assert z > 2*y;
}
}

Loop invariants​

An invariant statement encodes a loop invariant and must be placed at a loop head, as in the following example:

fun simple3(n: u64) {
let x = 0
loop {
spec {
invariant x <= n;
};
if (x < n) {
x = x + 1
} else {
break
}
};
spec {
assert x == n;
}
}

A loop invariant is translated into two assert statements and one assume statement to facilitate the inductive reasoning of properties about the loop. In break down, a loop invariant is translated to:

  • An assert statement that confirms the invariant holds when the loop is first encountered in the execution -- establishing the base case.
  • An assume statement that encodes the property that the invariant holds at loop iteration I.
  • An assert statement that checks whether the invariant continues to hold at loop iteration I+1.

Referring to pre-state​

Occasionally, we would like to refer to the pre-state of a mutable function argument in inline spec blocks. In MSL, this can be done with the old(T) expression. Similar to the semantics of old(..) in post conditions, an old(T) expression in an assume or assert statement always yields the value of T at the function entry point. Here is an example that illustrate the use of old(..) in an inline spec block:

fun swap(x: &mut u64, y: &mut u64) {
let t = *x;
*x = *y;
*y = t;
spec {
assert x == old(y);
assert y == old(x);
};
}

The above example is trivial as the same property can be expressed with post conditions (i.e., ensures) too. But there are cases where we must use old(..) to refer to the pre-state, especially in the specification of loop invariants. Consider the following example where we verify that the vector_reverse function properly reverses the order of all elements in a vector:

fun verify_reverse<Element>(v: &mut vector<Element>) {
let vlen = vector::length(v);
if (vlen == 0) return ();

let front_index = 0;
let back_index = vlen -1;
while ({
spec {
assert front_index + back_index == vlen - 1;
assert forall i in 0..front_index: v[i] == old(v)[vlen-1-i];
assert forall i in 0..front_index: v[vlen-1-i] == old(v)[i];
assert forall j in front_index..back_index+1: v[j] == old(v)[j];
assert len(v) == vlen;
};
(front_index < back_index)
}) {
vector::swap(v, front_index, back_index);
front_index = front_index + 1;
back_index = back_index - 1;
};
}
spec verify_reverse {
aborts_if false;
ensures forall i in 0..len(v): v[i] == old(v)[len(v)-1-i];
}

Note the usage of old(v) in the loop invariants. Without them, it is hard to express the invariant that the vector is partially reversed while the loop is iterating and the rest remain unchanged.

However, unlike the old(T) expressions in ensures conditions where T can be any valid expression (e.g., old(v[i]) is allowed), the old(T) expressions in assert and assumes statements accept only a single variable as T and that variable must be a function argument of a mutable reference type. In the above example, old(v[i]) is not allowed, and we should use old(v)[i] instead.

Specification variables​

MSL supports spec variables, also called ghost variables in the verification community. These variables are used only in specifications and represent information derived from the global state of resources. An example use case is to compute the sum of all coins available in the system and specify that the sum can be changed only in certain scenarios.

We illustrate this feature by introducing a spec variable that maintains the sum of all Counter resources from our running example. First, a spec variable is introduced via spec module block as follows:

spec module {
global sum_of_counters: num;
}

This value is going to be updated whenever a Counter is packed or unpacked. (Recall that mutation is interpreted as an implicit unpack and pack):

spec Counter {
invariant pack sum_of_counters = sum_of_counters + value;
invariant unpack sum_of_counters = sum_of_counters - value;
}

TODO: invariant pack and invariant unpack are currently not implemented

Now we may for example want to specify that the sum of all Counter instances in the global state should never exceed a particular value. We can do this as follows:

spec module {
invariant [global] sum_of_counters < 4711;
}

Note that spec variables can also be referenced from helper functions. Moreover, spec variables can be generic:

spec module {
global some_generic_var<T>: num;
}

When using such a spec variable, a type parameter must be provided, as in some_generic_var<u64>. Effectively, a generic spec variable is like a family of variables indexed by types.

Schemas​

Schemas are a means for structuring specifications by grouping properties together. Semantically, they are just syntactic sugar that expand to conditions on functions, structs, or modules.

Basic Schema Usage​

Schemas are used as such:

spec schema IncrementAborts {
a: address;
aborts_if !exists<Counter>(a);
aborts_if global<Counter>(a).value == 255;
}

spec increment {
include IncrementAborts;
}

Each schema may declare a number of typed variable names and a list of conditions over those variables. All supported condition types can be used in schemas. The schema can then be included in another spec block:

  • If that spec block is for a function or a struct, all variable names the schema declares must be matched against existing names of compatible type in the context.
  • If a schema is included in another schema, existing names are matched and must have the same type, but non-existing names will be added as new declarations to the inclusion context.

When a schema is included in another spec block, it will be checked whether the conditions it contains are allowed in this block. For example, including the schema IncrementAborts into a struct spec block will lead to a compile-time error.

When a schema is included, the names it declares can also bound by expressions. For example, one can write include IncrementAborts{a: some_helper_address()}. Effectively, not providing a binding is equivalent to writing IncrementAborts{a: a} if a is an existing name in scope.

Schemas can be generic. Generic schemas must be fully instantiated where they are included; type inference is not available for schemas.

Schema expressions​

When a schema is included, one can use a limited set of Boolean operators as follows:

  • P ==> SchemaExp: all conditions in the schema will be prefixed with P ==> ... Conditions that are not based on Boolean expressions will be rejected.
  • if (P) SchemaExp1 else SchemaExp2: this is treated similar to including both P ==> SchemaExp1 and !P ==> SchemaExp2.
  • SchemaExp1 && SchemaExp2: this is treated as two includes for both schema expressions.

Schema apply operation​

One of the main use cases for schemas is to be able to name a group of properties and then apply those to a set of functions. This is achieved by the apply operator. The apply spec block member can appear only in module spec blocks.

The general form of the apply operator is apply Schema to FunctionPattern, .. except FunctionPattern, ... Here, Schema can be a schema name or a schema name plus formal type arguments. FunctionPatterns consists of an optional visibility modifier public or internal (if not provided, both visibilities will match), a name pattern in the style of a shell file pattern ( e.g. *, foo*, foo*bar, etc.), and finally an optional type argument list. All type arguments provided to Schema must be bound in this list and vice versa.

The apply operator includes the given schema in all function spec blocks that match the patterns, except those excluded via the except patterns.

A typical use of the apply operator is to provide common pre-conditions and post-conditions to all functions in a module with some exceptions. Example:

spec schema Unchanged {
let resource = global<R>(ADDR):
ensures resource == old(resource);
}

spec module {
// Enforce Unchanged for all functions except the initialize function.
apply Unchanged to * except initialize;
}

Notice that while with global invariants we can express similar things, we cannot express the restriction of the invariant to only specific functions.

Opaque specifications​

With the pragma opaque, a function is declared to be solely defined by its specification at caller sides. In contrast, if this pragma is not provided, then the function's implementation will be used as the basis to verify the caller.

Using opaque requires the specification to be sufficiently complete for the verification problem at hand. Without opaque, the Move Prover will use the implementation as the source of truth for the definition of the function. But with opaque, if there is an aspect of the function definition unspecified, an arbitrary meaning will be assumed. For example, with the specification below, the increment function can abort under arbitrary conditions:

spec increment {
pragma opaque;
// aborts_if !exists<Counter>(a); // We need to add this to make the function not abort arbitrarily
ensures global<Counter>(a) == old(global<Counter>(a)) + 1;
}

In general, opaque functions enable modular verification, as they abstract from the implementation of functions, resulting in much faster verification.

If an opaque function modifies state, it is advised to use the modifies condition in its specification. If this is omitted, verification of the state changes will fail.

Abstract specifications​

The [abstract] property allows specifying a function such that abstract semantics are used at the caller side that is different from the actual implementation. This is useful if the implementation is too complex for verification, and abstract semantics are sufficient for verification goals. The [concrete] property, in turn, still allows specifying conditions that are verified against the implementation but not used at the caller side.

Consider the following example of a hash function. The actual value of the hash is not relevant for verification of callers, and we use an uninterpreted helper function delivering an arbitrary value chosen by the Move Prover. We can still specify the concrete implementation and verify its correctness:

fun hash(v: vector<u8>): u64 {
<<sum up values>>(v)
}
spec hash {
pragma opaque;
aborts_if false;
ensures [concrete] result == <<sum up values>>(v);
ensures [abstract] result == spec_hash_abstract(v);
}
spec fun abstract_hash(v: vector<u8>): u64; // uninterpreted function

The soundness of the abstraction is the responsibility of the specifier and not verified by the Move Prover.

NOTE: The abstract/concrete properties should only be used with opaque specifications, but the Move Prover will currently not generate an error message even though they are not used with opaque specifications.

NOTE: The modifies clause does not currently support abstract/concrete. Also, if no modifies is given, the modified state will be computed from the implementation anyway, possibly conflicting with [abstract] properties.

Documentation generation​

The organization of specification blocks in a file is relevant for documentation generation -- even though it is not for the semantics.

Expressiveness

The Move specification language is expressive enough to represent the full Move language semantics (formal argument outstanding) with one exception: functions that return a &mut T type.

Consider the following code:

struct S { x: u64, y: u64 }

fun x_or_y(b: bool, s: &mut S): &mut u64 {
if (b) &mut s.x else &mut s.y
}
spec x_or_y {
ensures b ==> result == s.x;
ensures !b ==> result == s.y;
}

We are not able to specify the full semantics of x_or_y in MSL because we cannot capture the semantics of mutable references. While we can say something about the value behind the reference at function exit, subsequent effects as in *x_or_y(b, &mut s) = 2 cannot be specified.

However, the Move Prover does understand the meaning of such functions -- the restriction is only in what we can specify. Practically, this means we cannot make the function x_or_y opaque and must let verification rely on that the Move Prover directly works with the implementation. Specifically, we can verify the following (which can then be opaque):

fun x_or_y_test(s: S): S {
*x_or_y(true, &mut s) = 2;
s
}
spec x_or_y_test {
pragma opaque;
ensures result.x == 2;
ensures result.y == s.y;
}

Supporting resources​